中國美國橡膠產品檢驗標準中英文對比表
美國橡膠檢驗標準系列號(中文對譯)
標準號 |
中文名 |
英文名 |
ASTM D573-2004(2010) |
Standard Test Method for Rubber8212;Deterioration in an Air Oven |
|
ASTM D413-1998(2007) |
橡膠特性-與軟質基底粘附性的標準試驗方法 |
Standard Test Methods for Rubber Propertyx2014;Adhesion to Flexible Substrate |
ASTM D5670-1995(2009) |
橡膠的標準試驗方法.加氫丁腈橡膠(HNBR)中殘余不飽和的紅外分光光度法的標準試驗方法 |
Standard Test Method for Rubber-Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Infrared Spectrophotometry |
ASTM D3566-2003(2009) |
用氧燃燒法測定在氯存在時橡膠中的溴含量的標準實施規程 |
Standard Practice for Rubber8212;Determination of Bromine in the Presence of Chlorine by Oxygen Combustion |
ASTM D2229-2010 |
鋼制輪胎簾布和橡膠支架的粘附力的標準試驗方法 |
Standard Test Method for Adhesion Between Steel Tire Cords and Rubber |
ASTM D2228-2004(2009) |
橡膠特性的標準試驗方法.相對抗磨性(皮考磨損機法) |
Standard Test Method for Rubber Property-Relative Abrasion Resistance by the Pico Abrader Method |
ASTM D3185-2006 |
包括混合物和油的SBR(苯乙烯合金橡膠)的橡膠評估的標準試驗方法 |
Standard Test Methods for Rubber-Evaluation of SBR (Styrene-Butadiene Rubber) Including Mixtures With Oil |
ASTM D3896-2007 |
合成橡膠取樣的標準實施規范.取樣 |
Standard Practice for Rubber From Synthetic Sources8212;Sampling |
ASTM D624-2000(2007) |
傳統硫化橡膠和熱塑性彈性體的撕裂強度的標準試驗方法 |
Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers |
ASTM D3484-2006 |
橡膠的標準試驗方法.加油溶解聚丁二烯橡膠(BR)的評定 |
Standard Test Methods for Rubber8212;Evaluation of Oil-Extended Solution BR (Polybutadiene Rubber) |
ASTM D813-2007 |
橡膠磨損的標準試驗方法.裂縫擴展 |
Standard Test Method for Rubber Deterioration-Crack Growth |
ASTM D3767-2003(2008) |
橡膠尺寸的測量的標準實施規程 |
Standard Practice for Rubberx2014;Measurement of Dimensions |
ASTM D5406-1993(2006) |
橡膠的標準實施規程.生產者加工性能指數計算 |
Standard Practice for Rubber-Calculation of Producer''s Process Performance Indexes |
ASTM D1025-2010 |
聚合級丁二烯中不揮發殘余物的標準試驗方法 |
Standard Test Method for Nonvolatile Residue of Polymerization Grade Butadiene |
ASTM D5774-1995(2009) |
橡膠可萃取物化學分析的標準試驗方法 |
Standard Test Methods for Rubber-Chemical Analysis of Extractables |
ASTM D454-2004(2010) |
Standard Test Method for Rubber Deterioration by Heat and Air Pressure |
|
ASTM D7121-2005 |
用Schob型回彈擺錘測定橡膠回彈特性的標準試驗方法 |
Standard Test Method for Rubber Property-Resilience Using Schob Type Rebound Pendulum |
ASTM D6909-2010 |
高溫和耐酸氟烴三元共聚物合成像膠標準規范 |
Standard Specification for High Temperature and Acid-Resistant Fluorocarbon Terpolymer Elastomer |
ASTM D750-2006 |
用人工風蝕裝置對橡膠老化性的標準試驗方法 |
Standard Test Method for Rubber Deterioration Using Artificial Weathering Apparatus |
ASTM D1349-2009 |
橡膠試驗溫度的標準實施規程 |
Standard Practice for Rubber-Standard Temperatures for Testing |
ASTM D1646-2007 |
橡膠粘度、應力松馳及預硫化特性(穆尼粘度計)的標準試驗方法 |
Standard Test Methods for Rubber-Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer) |
ASTM D3403-2007 |
橡膠的標準試驗方法.異戊橡膠(IR)的評定 |
Standard Test Methods for Rubber8212;Evaluation of IR (Isoprene Rubber) |
ASTM D4572-1989(2005) |
橡膠加工用化學藥品的試驗方法-硫磺的濕法篩選分析 |
Standard Test Method for Rubber Chemicals-Wet Sieve Analysis of Sulfur |
ASTM D3452-2006 |
橡膠的標準實施規程.裂解氣相色譜法識別 |
Standard Practice for Rubber8212;Identification by Pyrolysis-Gas Chromatography |
ASTM D623-2007 |
橡膠性能的標準試驗方法.壓縮發熱和彎曲疲勞試驗 |
Standard Test Methods for Rubber Property8212;Heat Generation and Flexing Fatigue In Compression |
ASTM D3187-2006 |
橡膠的標準試驗方法.NBR(丙烯腈丁二烯橡膠)的評定 |
Standard Test Methods for Rubber-Evaluation of NBR (Acrylonitrile-Butadiene Rubber) |
ASTM D4483-2005a |
在橡膠和碳黑生產工業中試驗方法標準的精確度評價的標準規程 |
Standard Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries |
ASTM D6411/D6411M-1999(2005) |
低釋氣性材料室溫硫化硅酮橡膠的標準規范 |
Standard Specification for Slicone Rubber Room Temperature Vulcanizing Low Outgassing Materials |
ASTM D5289-2007a |
用無轉子硫化儀測量橡膠性能硫化的標準試驗方法 |
Standard Test Method for Rubber Property-Vulcanization Using Rotorless Cure Meters |
ASTM D2433-2007 |
橡膠線的標準試驗方法 |
Standard Test Methods for Rubber Thread |
ASTM D3182-2007 |
混合標準化合物及制備標準硫化橡膠薄片用橡膠材料、設備及工序的標準實施規程 |
Standard Practice for Rubber-Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets |
ASTM D1148-2007a |
橡膠變質的標準試驗方法.暴露紫外線(UV)和熱輻射的淺顏色表面退色 |
Standard Test Method for Rubber Deterioration-Discoloration from Ultraviolet (UV) and Heat Exposure of Light-Colored Surfaces |
ASTM D5775-1995(2009) |
SBR中合成來源的苯乙烯橡膠的標準試驗方法 |
Standard Test Method for Rubber from Synthetic Sources-Bound Styrene in SBR |
ASTM D6814-2002(2008) |
基于交聯點密度的粒狀生膠脫硫百分比測定的標準試驗方法 |
Standard Test Method for Determination of Percent Devulcanization of Crumb Rubber Based on Crosslink Density |
ASTM D4678-2004(2009) |
標準物質的制備、試驗、驗收、文獻工作和使用 |
Standard Practice for Rubber-Preparation, Testing, Acceptance, Documentation, and Use of Reference Materials |
ASTM D3183-2010 |
Standard Practice for Rubberx2014;Preparation of Pieces for Test Purposes from Products |
|
ASTM D6740-2010 |
橡膠配方(雙-(三乙氧甲硅烷丙基)硫烷)中使用的硅烷的標準試驗方法:灼燃殘渣 |
Standard Test Method for Silanes Used in Rubber Formulations (bis-(triethoxysilylpropyl)sulfanes): Residue on Ignition |
ASTM D572-2004(2010) |
Standard Test Method for Rubber-Deterioration by Heat and Oxygen |
|
ASTM D1415-2006 |
橡膠特性的標準試驗方法.國際硬度 |
Standard Test Method for Rubber Property8212;International Hardness |
ASTM D4004-2006 |
橡膠的標準試驗方法.火焰原子吸收(AAS)分析法測定金屬含量 |
Standard Test Methods for Rubber8212;Determination of Metal Content by Flame Atomic Absorption (AAS) Analysis |
ASTM D3854-1990(2010) |
Standard Test Method for Rubber Thread-Resistance to Dry Heat |
|
ASTM D6047-1999(2009) |
乙烯-丙烯-二烯共聚三聚物(EPDM)中5-ENB或雙環戊二烯(DCPD)生橡膠測定的標準試驗方法 |
Standard Test Methods for Rubber, Raw--Determination of 5-Ethylidenenorbornene (ENB) or Dicyclopentadiene (DCPD) in Ethylene-Propylene-Diene (EPDM) Terpolymers |
ASTM D297-1993(2006) |
橡膠制品的標準試驗方法.化學分析 |
Standard Test Methods for Rubber Products-Chemical Analysis |
ASTM D816-2006 |
橡膠膠水的試驗方法 |
Standard Test Methods for Rubber Cements |
ASTM D1460-1986(2010) |
橡膠性能的標準試驗方法&8212.液體浸沒期間的長度變化 |
Standard Test Method for Rubber Property8212;Change in Length During Liquid Immersion |
ASTM D3186-2007 |
橡膠的標準試驗方法.與炭黑或炭黑和油混合的丁苯橡膠(SBR)的評定 |
Standard Test Methods for Rubber8212;Evaluation of SBR (Styrene-Butadiene Rubber) Mixed With Carbon Black or Carbon Black and Oil |
ASTM D3677-2010 |
橡膠的標準試驗方法.紅外分光光度鑒別法 |
Standard Test Methods for Rubber--Identification by Infrared Spectrophotometry |
ASTM D3848-2003(2009) |
碳黑混合的NBR(丙烯腈共聚物橡膠)橡膠評估的標準試驗方法 |
Standard Test Methods for Rubber8212;Evaluation of NBR (Acrylonitrile-Butadiene Copolymers) Mixed With Carbon Black |
ASTM C1521-2009e1 |
評價已安裝上的防風雨的密封接頭粘結性的標準實施規程 |
Standard Practice for Evaluating Adhesion of Installed Weatherproofing Sealant Joints |
ASTM D5644-2001(2008) |
橡膠化合材料的標準試驗方法.硫化顆粒橡膠粒徑分布的測定 |
Standard Test Methods for Rubber Compounding Materials Determination of Particle Size Distribution of Recycled Vulcanizate Particulate Rubber |
ASTM D1229-2003(2008) |
橡膠特性.在低溫時壓縮率的標準試驗方法 |
Standard Test Method for Rubber Property-Compression Set at Low Temperatures |
ASTM D5668-2009 |
合成揮發源物質制橡膠用標準試驗方法 |
Standard Test Methods for Rubber From Synthetic Sources-Volatile Matter |
ASTM D4575-2009 |
橡膠變質的標準試驗方法-測定實驗室測試小室內臭氧濃度的參照法和交替法 |
Standard Test Methods for Rubber Deterioration8212;Reference and Alternative Method(s) for Determining Ozone Level in Laboratory Test Chambers |
ASTM D2230-1996(2007) |
橡膠特性標準試驗方法.未硫化橡膠化合物的可擠壓性 |
Standard Test Method for Rubber Property-Extrudability of Unvulcanized Compounds |
ASTM D3568-2003(2009) |
橡膠的標準試驗方法:評價包括與油混合的EPDM(三聚乙丙橡膠)的標準試驗方法 |
Standard Test Methods for Rubber8212;Evaluation of EPDM (Ethylene Propylene Diene Terpolymers) Including Mixtures With Oil |
ASTM C1523-2010 |
測定預硫化彈膠接縫劑的模數、撕裂和粘合特性的標準試驗方法 |
Standard Test Method for Determining Modulus, Tear and Adhesion Properties of Precured Elastomeric Joint Sealants |
ASTM D6284-2009 |
橡膠性能.有效氯和氯胺水溶液影響的試驗方法 |
Standard Test Method for Rubber Property8212;Effect of Aqueous Solutions with Available Chlorine and Chloramine |
ASTM D4570-2002(2007) |
橡膠加工用化學藥品的試驗方法:篩分法測定硫的粒度分布 |
Standard Test Method for Rubber Chemicalsx2014;Determination of Particle Size of Sulfur by Sieving (Dry) |
ASTM D3847-2001(2007) |
橡膠的標準實施規程.獲取低于標準的試驗溫度的導則 |
Standard Practice for Rubber-Directions for Achieving Subnormal Test Temperatures |
ASTM D4482-2007 |
橡膠特性-伸展周期疲勞的標準試驗方法 |
Standard Test Method for Rubber Property-Extension Cycling Fatigue |
ASTM D2632-2001(2008) |
橡膠屬性標準試驗方法.垂直回跳法測定橡膠彈性 |
Standard Test Method for Rubber Property8212;Resilience by Vertical Rebound |
ASTM D1456-1986(2010) |
橡膠&8212特性的標準試驗方法.特定應力下的延伸 |
Standard Test Method for Rubber Property8212;Elongation at Specific Stress |
ASTM D531-2000(2010) |
普西和瓊斯橡膠壓縮的標準試驗方法 |
Standard Test Method for Rubber Property-Pusey and Jones Indentation |
ASTM D429-2008 |
橡膠特性與硬質基底粘附性的標準試驗方法 |
Standard Test Methods for Rubber Property8212;Adhesion to Rigid Substrates |
ASTM C1522-2005 |
冷液彈性防水薄膜熱老化后伸展性的標準試驗方法 |
Standard Test Method for Extensibility After Heat Aging of Cold Liquid-Applied Elastomeric Waterproofing Membranes |
ASTM D6601-2002(2008) |
用無轉子剪切流變儀測量橡膠在固化和固化后動態特性的標準試驗方法 |
Standard Test Method for Rubber Propertiesx2014;Measurement of Cure and After-Cure Dynamic Properties Using a Rotorless Shear Rheometer |
ASTM D3188-2006 |
IIR(異丁烯橡膠)的橡膠評估標準試驗方法 |
Standard Test Methods for Rubber-Evaluation of IIR (Isobutene-Isoprene Rubber) |
ASTM D865-1999(2005) |
橡膠的空氣中加熱變質的標準試驗方法(試管封閉法) |
Standard Test Method for Rubber-Deterioration by Heating in Air (Test Tube Enclosure) |
ASTM D412-2006ae2 |
硫化橡膠、熱塑橡膠和熱塑合成橡膠的拉伸試驗方法 |
Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomersx2014;Tension |
ASTM D1630-2006 |
橡膠耐磨特性的標準試驗方法 |
Standard Test Method for Rubber Property-Abrasion Resistance (Footwear Abrader) |
ASTM D378-2010 |
Standard Test Methods for Rubber (Elastomeric) Conveyor Belting, Flat Type |
|
ASTM D575-1991(2007) |
橡膠壓縮特性的標準試驗方法 |
Standard Test Methods for Rubber Properties in Compression |
ASTM C1518-2004(2009) |
預硫化彈性有機硅接縫密封劑的標準規范 |
Standard Specification for Precured Elastomeric Silicone Joint Sealants |
ASTM D1053-1992a(2007) |
橡膠性能的標準試驗方法.低溫下固化:撓性聚合物和涂層織物 |
Standard Test Methods for Rubber Property-Stiffening at Low Temperatures: Flexible Polymers and Coated Fabrics |
ASTM D5051-2006 |
橡膠合成配料的標準試驗方法.二硫化苯并噻唑(MBTS).化驗 |
Standard Test Method for Rubber Compounding Materials8212;Benzothiazyl Disulfide (MBTS)8212;Assay |
ASTM D991-1989(2010) |
橡膠特性標準試驗方法.導電及抗靜電制品體積電阻系數 |
Standard Test Method for Rubber Property-Volume Resistivity Of Electrically Conductive and Antistatic Products |
ASTM D925-2006e2 |
橡膠特性.表面的著色性(接觸、色移及擴散)的標準試驗方法 |
Standard Test Methods for Rubber Propertyx2014;Staining of Surfaces (Contact, Migration, and Diffusion) |
ASTM D1566-2010e1 |
橡膠相關標準術語 |
Standard Terminology Relating to Rubber |
ASTM D4620-2002(2007) |
測定橡膠中氧化鋅有效表面積的標準試驗方法 |
Standard Test Method for Evaluating the Effective Surface Area of Zinc Oxide in Rubber |
ASTM D3137-1981(2007) |
橡膠性能的標準試驗方法.水解穩定性 |
Standard Test Method for Rubber Property8212;Hydrolytic Stability |
ASTM D5667-1995(2010) |
Standard Test Method for Rubber From Synthetic Sources-Total and Water Soluble Ash |
|
ASTM D1418-2010a |
Standard Practice for Rubber and Rubber Latices-Nomenclature |
|
ASTM D7050-2004(2009) |
天然橡膠的標準實施規程-基于預測加工性能的取樣和分類 |
Standard Practice for Rubber from Natural Sources-Sampling and Sorting Bales Based on Predicted Processing Properties |
ASTM D2240-2005(2010) |
用硬度計測定橡膠硬度的標準試驗方法 |
Standard Test Method for Rubber Property8212;Durometer Hardness |
ASTM D5054-1990(2009) |
橡膠化學制品的標準試驗方法.二苯胍(DPG)和二鄰甲苯基胍(DDTG)分析 |
Standard Test Method for Rubber Chemicals-Diphenyl Guanidine (DPG) and Di-o-tolyl-guanidine (DOTG) Assay |
ASTM D471-2010 |
Standard Test Method for Rubber Propertyx2014;Effect of Liquids |
|
ASTM D430-2006e1 |
Standard Test Methods for Rubber Deterioration-Dynamic Fatigue |
|
ASTM D5805-2000(2009) |
(原批)橡膠的碳黑合成的標準試驗方法 |
Standard Test Method for Rubber from Synthetic Sources--Carbon Black in Masterbatches |
ASTM D814-1995(2010) |
橡膠特性揮發性液體蒸汽滲透性的標準試驗方法 |
Standard Test Method for Rubber Property- Vapor Transmission of Volatile Liquids |
ASTM D5044-2006 |
橡膠合成配料的標準試驗方法.二硫化苯并噻唑(MBTS)中的游離2-巰基苯并噻唑(MBT) |
Standard Test Method for Rubber Compounding Materials8212;Free 2-Mercaptobenzothiazole (MBT) in Benzothiazyl Disulfide (MBTS) |
ASTM D926-2008 |
橡膠屬性標準測試法:塑性與回復性行(平行板法)測試 |
Standard Test Method for Rubber Property8212;Plasticity and Recovery (Parallel Plate Method) |
ASTM D1149-2007 |
臭氧可控環境中橡膠變壞龜裂的標準試驗方法 |
Standard Test Methods for Rubber Deterioration-Cracking in an Ozone Controlled Environment |
ASTM D2084-2007 |
用振動圓盤硫化計測定橡膠硫化性能的標準試驗方法 |
Standard Test Method for Rubber Property-Vulcanization Using Oscillating Disk Cure Meter |
ASTM D1171-1999(2007) |
橡膠變質標準試驗方法.室外或小室內橡膠表面臭氧龜裂(三角形試樣) |
Standard Test Method for Rubber Deteriorationx2014;Surface Ozone Cracking Outdoors or Chamber (Triangular Specimens) |
ASTM D5992-1996(2006)e1 |
使用震蕩方法進行硫化橡膠和橡膠類似材料動態試驗的標準指南 |
Standard Guide for Dynamic Testing of Vulcanized Rubber and Rubber-Like Materials Using Vibratory Methods |
ASTM D5508-1994a(2009)e1 |
液面上毛細管氣相色譜法測定苯乙烯.丙烯腈共聚物樹脂和腈.丁二烯橡膠中殘留丙烯腈單體的標準試驗方法 |
Standard Test Method for Determination of Residual Acrylonitrile Monomer in Styrene-Acrylonitrile Copolymer Resins and Nitrile-Butadiene Rubber by Headspace-Capillary Gas Chromatography (HS-CGC) |
ASTM D5603-2001(2008) |
橡膠復合材料-再生顆粒性硫化橡膠的標準分類 |
Standard Classification for Rubber Compounding Materialsx2014;Recycled Vulcanizate Particulate Rubber |
ASTM D3855-1984(2010) |
Standard Test Method for Rubber Thread-Deterioration Due to Standard Washing Solution Treatment |
|
ASTM D3346-2007 |
橡膠特性的標準試驗方法.用莫氏粘度計(德爾塔莫尼)測定SBR乳膠(丁苯橡膠)的可加工性 |
Standard Test Methods for Rubber Property-Processability of Emulsion SBR (Styrene-Butadiene Rubber) With the Mooney Viscometer (Delta Mooney) |
ASTM F2523-2007e1 |
室溫下硫化人造橡膠抗爆破性能的標準實施規程 |
Standard Practice for Blowout Resistance of Room-Temperature Vulcanized Elastomers |
ASTM D5605-1994(2007) |
苯乙烯聚丁橡膠(SBR)標準規范-原始穆尼粘度目標值的確定 |
Standard Practice for Styrene-Butadiene Rubber (SBR)8212;Establishing Raw Mooney Viscosity Target Values |
ASTM D1329-2008 |
評定橡膠特性的標準試驗方法-低溫收縮(TR試驗) |
Standard Test Method for Evaluating Rubber Propertyx2014;Retraction at Lower Temperatures (TR Test) |
ASTM D5099-2008 |
使用毛細管流變儀對橡膠加工性能的標準試驗方法 |
Standard Test Methods for Rubberx2014;Measurement of Processing Properties Using Capillary Rheometry |
ASTM D1871-2004(2010) |
輪胎鋼絲和橡膠間粘結性的標準試驗方法 |
Standard Test Method for Adhesion Between Tire Bead Wire and Rubber |
轉自:橡膠技術網,橡膠行業門戶網站!

- 北橡院組織制定的國際標準ISO 5273:2025正式發布2025-03-18 02:03:16
- 天津市發布地方標準《橡膠制品工業大氣污染物排放標準》2024-11-22 04:11:58
- 三菱電機子公司253種橡膠產品違規 1月發現時未公布2024-09-04 10:09:58
- 海南省市場監督管理局公布2023年流通市場汽車輪胎產品質量監督抽2023-11-16 10:11:33
- GB 9743、GB 9744,2項輪胎強標征求意見!2023-08-25 10:08:58
- 工業和信息化部批準《工業用導電和抗靜電橡膠板》等412項行業標準2023-08-18 02:08:38
- 輪胎商標訴爭,有新動向2023-08-15 04:08:17